Vista x64 tweaks

Shell Commands for Windows Vista source. The shell: command can be used to open a special folder directly from the Start, Search menu. To launch the Documents folder of your User Profile, you'd type shell:Personal. Below is a complete shell: commands listing for Windows Vista. Note: Backup Operator or Administrator is the minimum membership required to complete the actions below.

Shrink an existing partition to create new unallocated space, from which you can create a new partition:. This problem occurs because the address space is limited to 4 GB in a bit hardware environment.

On bit versions of Windows, PAE is disabled by default. PAE is an addressing strategy that uses a page-translation hierarchy to enable systems with bit addressing to address more than 4 GB of physical memory. PAE must be supported by the processor. Memory Limits for Windows Releases. Windows Vista may report less memory than you expect. Windows will usually search for whatever you enter in the Search box by looking in the file name, file contents, and file properties of all the files in the current view.

Type "Summer," for example, and it will find files named "sunset in summer. If you want to search more selectively, you can filter your search by specifying which file property to search. To filter by file property, separate the name of the pr kind: he sear artist: colon, as in these examples:. You can filter by any property that appears in the file list headings. To see the complete list of properties that you can filter by, right-click the hea Boolean filters roperties for, and then click More.

Using Boolean filters is another way to perform a more precise se AND can combine them with other search filters:. If you turn on Natural Language Search , you can perform searches in a simpler way, without using colons and without the need to enter AND a Without natural language: ample, compare these searches:. Disabling Services guide by Slimy. SpeedyVista - Service Guide.

Windows Reliability and Performance Monitor uses performance counters, event trace data, and configuration information, which can be combined into Data Collector Sets. You can generate a report detailing the status of local hardware resources, system response times, and processes on the local computer along with system information and configuration data.

This report includes suggestions for ways to maximize performance and streamline system operation. It's important to keep your computer as secure as possible. Using secure logon provides an additional layer of security for your computer by ensuring that the authentic Windows logon screen appears.

Some programs and features that are included with Windows, such as Internet Information Services, must be turned on before you can use them. Certain other features are turned on by default, but you can turn them off if you don? In earlier versions of Windows, to turn a feature off you had to uninstall it completely from your computer. In this version of Windows, the features remain stored on your hard disk, so you can turn them back on if you want to.

Turning off a feature does not uninstall the feature, and it does not reduce the amount of hard disk space used by Windows features. Second method: You need to perform 2 steps each to swap to bit version or to undo the change back to bit version WMP. The unregmp2. With either one of two methods, you will have complete full x64 Windows Media Player experience. Open the Control Panel and click on Power Options. Select the Power Plan that you want to use and click on "Change plan settings".

Click on Change advanced power settings, double click on "Power buttons and lid". Double click on "Start menu power button", change the Setting to Shut down. I've created a little app that opens the same Dialog : x, just extract it to anywhere you want and create a shortcut in Quick Launch.

You can set it to delete files from a previous Windows installation, error dump files, Temporary Windows installation f Note: ails, Files discarded by Windows upgrade, Error Reporting Files, ect. Note: It performs a Disc Cleanup on all disks. Because browsers can host plug-in extensibility, security settings within the browser can make plug-ins fail. You can enable DEP by navigating to the following dialog and checking the highlighted option shown below note, you must elevated to admin first, otherwise the option is grayed out.

With EasyBCD, almost anything is possible. Setting up and configuring Windows boot entries is simple, and there is no easier way to quickly boot right into Linux, Mac OS X, or BSD straight from the Windows Vista bootloader - on the fly, no expert knowledge needed! What is User Account Control. Configuring User Account Control settings. To get to the configuration screen for this, type in security to the start menu search box.

You should see the Local Security Policy as the top search item. Over in the right hand part of the window, scroll down near the bottom and find the item titled?

User Account Control: Switch to the Note: top when prompting for elevation? Note: This d regedit system slightly less secure, so be warned. You should see a key called PromptOnSecureDesktop. Hidden away in local group policy is a setting that will allow you to turn on the ability to use a USB storage device instead of a TPM key to store the encryption key.

This is a great feature for users that don't have the latest high-end hardware because you can still use hard drive encryption. However, every time you turn on your computer, the USB storage device that has the encryption key located on it must be plugged in. Without it, your computer will not boot up. You can set up Windows to add check boxes to file views see picture to make it easier to select several files at once.

This gives you the option to select files without having to press keys on your keyboard, and helps ensure that you won't accidentally lose your file selection if you click the wrong location. You can enable this feature in "Folder and Search Options":. Install: Copy TCB.

Uninstall: Remove TCB. Enable the Aurora boot screen source. If you are tired of t msconfig screen in Windows Vista, there is a better looking one hidden away:. Press OK. Windows places a file on your hard drive that it uses when your computer goes into hibernation mode. If you do not use hibernation mode, or your computer does not properly support it, you may want to disable hibernation and clear the file off your hard drive to free up some space the file will use as Disable Hibernation: physical memory, so if you have 1GB of RAM, it?

Disable Hibernation:. Hello all. I just installed Vista Ultimate x64 for my 4gb of RAM support and I was wondering if anyone could suggest a good list of tweaks for optimum usage. Sometimes it seems like my hard drive is constantly working! Isn't this due to some sort of indexing or whatever that can be turned off?

Any other sites, lists of tweaks, or advice is appreciated. DeaconFrost [H]F Junkie. Joined Sep 6, Messages 11, Xaeos said:. Click to expand Joined Feb 12, Messages 2, DeaconFrost said:. I don't mean to sound like I'm thread-crapping, but this indexing and it's purposes are one of the main reasons why someone would switch to Vista. You don't want to turn it off.

Let it do it's thing, and over the course of a few days to two weeks or so depending on usage, it will settle down.

So I'm guessing this is just a normal thing where its figuring out where everything is on the drives All right, what about defragmentation? I was told Vista likes to defragment as it goes along, which can impact performance? Also, it appears to have some sort of shared memory set to my video card GeForce GTX - is this normal vista behavior, because it says I have something like 2gb of video memory available?

Maxx [H]ard Gawd. It is only recommended to change this setting in saturated Gigabit LAN environments, where you do not want to give priority to multimedia playback. Reportedly, disabling throttling by using ffffffff can also help reduce ping spikes in some online games.

Default value is 10 under Windows 7, similar behavior if the setting is not present in the Registry. This setting, in combination with the above "NetworkThrottlingIndex" can help some games and video streaming. We recommend reducing the reserved CPU for background processes from the default. See also: MSDN ms As with previous versions of Windows, one can improve DNS and hostname resolution by increasing the priority of of related services, while keeping their order.

This is explained in more defail in our Host Resolution article. Lower numbers mean higher process priority. The corresponding registry settings in Vista are as follows:. The default Vista values have improved from previous Windows versions, and are usually sufficient under normal load. However, in some instances under heavy load it it may be necessary to adjust the settings below to tweak the availability of user ports requested by an application.

If the default limits are exceeded under heavy loads, the following error may be observed: "address in use: connect exception". By default under Vista when the values are not presend in the registry , the OS can allocate up to ephemeral ports above port , and the OS waits for seconds before reclaiming ports after an application closes the TCP connection.

This is a considerable improvement over older Windows versions. Recommended: leave at default, or use a number above up to decimal as necessary - maximum number of ports to use.

Recommended: 30 decimal, denoting 30 seconds - time to wait before reclaiming ports, in seconds. Default time before reclaiming ports, if value is at 0xffffffff or not present in the registry is seconds. Just reducing the delay is often sufficient without changing MaxUserPort, as it allows for reusing ports more efficiently.

To query the current values, in command prompt, type: netsh int ipv4 show dynamicportrange tcp for UDP, use the same command, replacing only "tcp" with "udp" at the end. Notes: By default, dynamic ports are allocated between ports and for a total of ephemeral ports.

Using netsh allows to set both the starting port and port range. Editing the Registry allows for setting the port range, and the starting port is fixed at Deleting the MaxUserPort registry entry or setting it to a value outside the allowed range causes the OS to revert to using the default values. Some system processes can install port filters to block certain port ranges. Each connection requires such control block, so this value determines how many active connections TCP can support simultaneously.

Normally, TCP does not release a connection or reuse its resources until the connection has remained closed for a period of time specified by the value of the TcpTimedWaitDelay entry.

We recommend increasing it from the default if using network intensive applications that open many simultaneous connections, such as P2P.

TCP stores control blocks in a hash table so it can find them very quickly. If you adjust the number of TCBs the system creates as specified by the value of MaxFreeTcbs , you should also adjust the value of the hash table proportionally. Note this only has effect in the presence of running QoS applications that request priority traffic. Registry value is undocumented for the Vista version of Windows.

To customize this setting, in the Windows Registry:. Recommended: 0 , possible values between 0 and - indicates the percentage value of reserved bandwidth for QoS applications. Set to 0 to disable. In order to define DiffServ DSCP values, according to Microsoft the machine needs to have joined a domain, and interfaces have to see the domain controller.

To overcome this limitation, so that you can tag DSCP values even for adapters that do not have access to a domain, use the following hidden registry key:. Notes: gpedit. This registry key may also be needed in systems with multiple network adapters present. When this happens, you can usually see the following error in the Event Viewer System log:. Source: srv Event ID: Level: Error The server was unable to allocate from the system nonpaged pool because the server reached the configured limit for nonpaged pool allocations.

It is also possible to get an error indicating that: "Not enough server storage is available to process this command". To avoid those errors, you need to change the way Windows allocates memory for network services and file sharing.

The below settings optimze the machine as a file server so it would allocate resources accordingly. There are two related registry settings:. Note: Even though this tweak is from older Windows server OSes, it works on workstation versions, as well as Windows Vista and 7 32 and 64 bit. The tweak below allows for tweaking or disabling Nagle's alogrithm. Disabling "nagling" allows for very small packets to be transferred immediately without delay. The dafault state Nagling enabled improves performance by allowing several small packets to be combined together into a single, larger packet for more efficient transmission.

Keep in mind that disabling Nagle's algorithm may have some negative effect on file transfers, and can only help reduce delay in some games. Find the correct one with your IP address listed. Setting not present by default. For gaming performance, recommended is 1 disable.

For pure throughput and data streaming, you can experiment with values over 2. Wifi performance may see a slight improvement with disabled TcpAckFrequency as well.

Note you can also set this to 1 to reduce the nagle effect from the default of ms without disabling it. The TCP Optimizer version 3. More detailed information about all available options is provided in the online documentation , answers to frequently asked questions are available in the Optimizer FAQ , and personalized help is available through our broadband tweaking forum.

It allows for tweaking all the above netsh settings and registry values in one simple step with the exception of the "gaming tweak" section. The patch also provides for easily reverting the settings to their Windows default values. Click Y when prompted to apply settings. Note: If for some reason Windows renames the file and adds. Windows Vista tcpip. Username: Password: forgot password? Home » Articles » Registry Tweaks. I did not try the registry edits.

I think I will leave those for now, unless I experience more problems with my internet speed. So far, it is much better than before tweaking the settings. Any other techniques or why is it like that? Try setting the Fragmentation Threshold to a lower value. By default, for most WIFI cards it is set to Try setting it to bytes. Does Vista have the connection limitation like in XP? IF so, can we use the same registry hack you wrote as below?

Good read, Philip. The second paragraph in the article explains "elevated command prompt" - it simply means you need administrator priviledges to run those commands.

I have noticed that some OEM installations of Vista have limitations on users, even when set as an administrator To get past this, you must re-install Vista. Do not use the OEM installation since it likely contains the limitations - - instead, use a retail version or a site-licensed OEM version or use a service like FireDog. Does it work with wireless broadband? I am sorry, but does anyone here speak english?